Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Alumminum Reciever???

  1. #1
    Join Date
    Mar 2004
    Location
    Ohio
    Posts
    145

    Post

    Do Benelli semi autos have alumminum recievers?
    If so i am going with the 11-87 if they don't then benelli should consider making them with steel recievers.
    Thanks,
    BenelliBoy

  2. #2
    Join Date
    Sep 2004
    Location
    Western Arkansas
    Posts
    58

    Post

    Why is steel so much better than aluminum?

    I can't see why steel vs. aluminum reciever would scare you away from a gun.

    Could you please tell me why you favor steel over aluminum? Not saying you're wrong or right, I just want to know your reasons.

  3. #3
    Join Date
    Mar 2004
    Location
    Ohio
    Posts
    145

    Post

    Alumminum dings and scratches alot easier than steel and i hunt in heviley wooded areas. So it would scratch and ding alot easier than it would if it had a steel reciever.
    Just my 2 cents,
    BenelliBoy

  4. #4
    Join Date
    Nov 2004
    Location
    Helsinki, Finland
    Posts
    2

    Post

    In my experience, my Centro is far less prone to scratch than my Mossberg 590, Winchester 1300 and Valmet M1950. The fact that its receiver is made of aluminium and not steel doesn't really tell you anything about how hard it is or how easily its surface dings/scratches. There are several hundreds of aluminium alloys used in this industry, many of which are much harder than tool steel.

    Then again, it's your choice. I just don't want to see anyone making decisions based on false assumptions.

  5. #5
    Join Date
    Mar 2004
    Location
    Ohio
    Posts
    145

    Post

    Not trying to to cause a fued but i was just wondering why you think my assimptions are false?
    If you could please explain why. i would much appreciate it.
    Thanks,
    BenelliBoy

  6. #6
    Join Date
    Aug 2003
    Location
    Elk Grove, CA
    Posts
    1,951

    Post

    Here is my take.

    Benelli has used aluminum alloy receivers for at least 20 years, so it must be working.

    I have a 15 y.o. SBE that has been on maybe 750 ducks hunts, the receiver looks as good as new. So, as to my 15 y.o. SBE, you are incorrect.

    Reasons why aluminum alloy is better than steel:

    Steel rusts, aluminum alloy does not.

    Steel needs to be reblued, aluminum alloy does not.

    Steel weights more than aluminum alloy.

    The aluminum alloy used by Benelli is stronger than steel.

    I could prolly keep writing all day.

    Buy the 11-87, it's a great gun, no problems with jamming, ever.......

    mudhen - CA
    mudhen - CA

    "Lighten up Francis"

  7. #7
    Join Date
    Mar 2004
    Location
    Ohio
    Posts
    145

    Post

    Thanks mudhen.

  8. #8
    Join Date
    Jan 2004
    Location
    Georgia
    Posts
    84

    Post

    Originally posted by mudhen:


    Buy the 11-87, it's a great gun, no problems with jamming, ever.......

    mudhen - CA
    Uh, ok. Thats a new one.
    It's Thanksgiving mudhen, not April Fools. hehehe

  9. #9
    Join Date
    Aug 2004
    Location
    MOREHEAD CITY / ATLANTIC BEACH NC
    Posts
    80

    Post

    What I'm wondering is..........you have 72 posts on the boards and you just now get around to asking about receivers??? I would have thought you already owned a Benelli!!??!!

  10. #10
    Join Date
    Jul 2003
    Location
    under the Sunshine Skyway
    Posts
    2,646

    Post

    hey EFLOYD,,,mudhen's Benelli SBE is older than the boy,,,,,,,,,,,,,,,,,,,,or the self proclaimed Benelli boy,,,,,,,,so,,,,,,,,armed with that basic fact,now you know what your dealing with ----------------------------------M1014

Similar Threads

  1. Nova Reciever Wear
    By Cleric in forum Benelli
    Replies: 0
    Last Post: 09-28-2006, 07:11 PM
  2. Barrel stuck in reciever
    By CZJedi in forum Benelli
    Replies: 13
    Last Post: 05-25-2006, 04:04 PM
  3. m1 reciever ?
    By jtschmitz in forum Benelli
    Replies: 1
    Last Post: 05-17-2006, 01:13 PM
  4. Reciever Wear on SBE 2 ???
    By DUCK in forum Benelli
    Replies: 11
    Last Post: 03-24-2005, 06:26 PM
  5. how to polish aluminum reciever??
    By birdkilr in forum Benelli
    Replies: 7
    Last Post: 01-15-2004, 07:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •