Results 1 to 7 of 7

Thread: PATTERNMASTER ?

  1. #1
    Join Date
    Mar 2006
    Location
    NEW YORK
    Posts
    5

    Post

    Is anyone using a Patternmaster external choke? on a SBE II, if so how much did it benifit your shooting ? i am having trouble finding my SBE II's sweet spot and im looking for any help i can get.

  2. #2
    Join Date
    Sep 2004
    Location
    USA
    Posts
    7,492

    Post

    Tried one and didn't like it.
    I use Rhino for turkey and Primos Dead Zone for waterfowl.

  3. #3
    Join Date
    Feb 2006
    Location
    Ca. USA
    Posts
    14

    Post

    The cri-chokes performed very good in my sbe2--however so did the wad wizard supreme (which by the way is built on the same principle as the patternmaster). The wad wizard in my opinion is far superior to the pm tube. The biggest reason I like the wadwizard is for the shorter shot strings--(more shot on target all at once)! You will have to pattern your shotgun of course as all shotguns even the same make could give you different results. The wadwizard is guaranteed--if you don't like it you can return it. You can call them for more info--talk to Lori. Hope some of this helps.

  4. #4
    Join Date
    Dec 2005
    Location
    MN
    Posts
    98

    Post

    I've seen my brother's and my friend's Pattermaster twist out and loosen, when being shot.

    Has anyone else had this problem?

  5. #5
    Join Date
    Feb 2006
    Location
    Ca. USA
    Posts
    14

    Post

    Yes the patternmaster will loosen--that is another reason I switched to the wad wizard as they seem to stay snug when hunting.

  6. #6
    Join Date
    Jun 2004
    Location
    CA
    Posts
    14

    Post

    I have all three tubes for my SBE II and have been happy with the performance.

    I use the long range extended pattern master designed for 3.5 inch shells for Geese and I use the midrange tube for all duck shooting. I found the short range to give too open of a pattern with the 3.5 shells. I use 3.5 Steel 2's for ducks and like to put as much steel into the bird as I can, therefore tighter chokes. I need to pattern the Pattern Masters vs the Factory Mod and see what I get.

    [ 03-20-2006, 12:59 AM: Message edited by: rotaxbruce ]

  7. #7
    Join Date
    Nov 2005
    Location
    Michigan
    Posts
    25

    Post

    I have a set of 3 Patternaster tubes that fit the Benelli SBE(I), Benelli Montefeltro, Beretta, etc. The set consists of Short Range (over decoy), Mid Range, and Standard Range chokes. I did not buy the Extended Range tube that gives tight patterns with 3 1/2 inch shells. Following is info received from the Patternmaster owner who I called before I bought them:

    · The chokes give a shorter shot string and thus a higher shot density on target through wad retardation
    · Shorter shell, slower velocity, and larger shot give tighter patterns
    · Longer shell, higher velocity, and smaller shot give wider patterns

    When goose/duck hunting this year I used the Standard Range tube in my Benelli with a 3 1/2 inch steel shot shell in the chamber (seems to throw a wide pattern with this choke) followed by 3" steel or Hevi-shot in the magazine to give a tighter pattern.

    I use the Short Range and either Medium or Standard chokes in my Beretta O/U for pheasants.

    I used these chokes in South Dakota for pheasants and North Dakota for waterfowl in 2005 and was very pleased with the results. Many people that get one of these chokes get the Extended Range and then the pattern may be too tight for them.

    I got the non-ported chokes because I didn't want the louder noise in the blind that the porting gives.

Similar Threads

  1. STOEGER 2000 & PATTERNMASTER CHOKES
    By HOGBUSTER1 in forum Stoeger Firearms
    Replies: 3
    Last Post: 11-13-2006, 01:25 PM
  2. Patternmaster or Primos Dead Zone
    By sbeIIfan in forum Waterfowling
    Replies: 2
    Last Post: 11-07-2006, 01:14 PM
  3. patternmaster choke on a sbe ll
    By DukDog in forum Benelli
    Replies: 2
    Last Post: 09-19-2005, 11:46 PM
  4. Ebay - Patternmaster for SBEII
    By tucker301 in forum Benelli
    Replies: 0
    Last Post: 03-20-2005, 11:45 PM
  5. Anyone use a PatternMaster with a 612, 912???
    By BAMAH2OFLR in forum Franchi
    Replies: 0
    Last Post: 08-25-2003, 01:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •