M4 Pistol grip stock question

[AR-BALLISTIC]

Hi guys , I removed my fake collapsable pistol grip stock on my M4 and installed the fixed pistol grip stock. Its all back together and I noticed that there is the slightest of play in the stock if I turn it with a bit of muscle. Just a tiny bit. It seems fine, any opinion on that. I mean you would not even notice unless you really try and turn it. Also when I threaded the pistol grip stock into place I noticed if you thread it too tight the trigger group won't fit in so I backed it out one turn and the trigger group popped right in. Thanks for any input, Michael

[Duggan]

I had to force it that extra 90 degrees beyond where it felt like I should stop to get it to line up perfectly.

While I can't endorse anyone else doing this, it made everything snug as can be.

However, if your stock can go almost a complete full turn more than where you have it ... that's probably what you need to do.

[AR-BALLISTIC]

UPDATE: I spoke to Benelli Customer Service and an ARMORER want's to look at it. So out it went today. I miss it already, ahhhhhhhhhhhh!! Anyway , I am sure it will come back PERFECT !! Thanks Duggan for the reply. Michael