P350 Pump Bolt Problem

[Jedibob]

Hello,

So my dad recently disassembled his P350 to remove the magazine plug. When he put it back together, however, he forgot to place the bolt back into the recesses on the guide bars of the foregrip. It is now stuck in the chamber, all the way at the back. Only the bolt face is visible, and while it is a little loose, the bolt body only moves a few millimeters back and forth, and refuses to come out.

Does anyone know how to get the bolt out? ANY small insight would be helpful.

Thanks,

Jedibob.

[Benelligunny]

Remove the pin holding the trigger assembly in (nothing will pop out). Remove the trigger assembly. This should free the bolt from the receiver. Reinstall the trigger assembly and pin and put the gun back together properly.

[Dick Hertz]

Aa a Dept Armorer whenever an Officer came in with a "paper bag full of parts" the story ALWAYS started off with "Well my [fill in the blank relative] got ahold of my gun and he..." Nice to see not much has changed.