Wow.....didn't expect that.

[KB Fab]

TKTM, please don't post in my threads anymore and I'll give you the same courtesy. I really don't want any more interaction with you.

[KB Fab]

Just went there and received: http://geissele.com/benellim4super90hammer.aspx


Price: $49.00
Item Number: #03-190
Availability: Back Order

You have to like it when it says "Back Order" instead of "Discontinued". Means they will be back in stock.

[TKTM]

TKTM, please don't post in my threads anymore and I'll give you the same courtesy. I really don't want any more interaction with you.

KB Fab, So you don't want me to respond when YOU make incorrect assertations about information that I posted? Now not only is that discourtous on your part, but it also takes some gall.

I'm not sure why you are so hard up to disprove the information I supplied about Gesselli not having enough demand to support further production, especially when you rushed out to buy a hammer based on the information I provided.

If we set aside the fact that you ran out and bought an M4 hammer based on the information I provided, and assume that your so called "debunking" is not driven by some sort of other desire; maybe your "debunking" would have gone better if you had inquired as to the source of the information I provided. Strange you didn't ask about that?

[Unobtanium]

Not a thing except for counting as 1 part towards 922r compliance.

I question this. Benelli is a quality product, but I would dare say that if you took 1000 hammers made by Benelli, and 1000 made by Geissele, and compared them, the Geissele hammers would be of more consistent spec.

That said, I love Geissele's products, the company, and freely admit that I would buy it just for the name alone and to be one of the cool kids

[marc63]

KB Fab thanks for this thread. "Back order" and an ongoing store listing indicate to me "demand" and further production. Not to mention the farkles they sent, further testament to Geissele's commitment to this item. I'm convinced.

[KB Fab]

KB Fab thanks for this thread. "Back order" and an ongoing store listing indicate to me "demand" and further production. Not to mention the farkles they sent, further testament to Geissele's commitment to this item. I'm convinced.

Thank you. I spoke with someone at Geissele who told me that there were no plans to discontinue the hammer so I feel with that, and the back order/listing status like you mentioned, a confidence that it isn't going anywhere.

I don't know who this TKTM person is, or their agenda, and I don't really care anymore. I'm done with him (not just from this thread) and he's the first person I have actually put on the "ignore" list. if by chance he can see this post, I WILL NOT EVER engage again, I promise.

[KB Fab]

I question this. Benelli is a quality product, but I would dare say that if you took 1000 hammers made by Benelli, and 1000 made by Geissele, and compared them, the Geissele hammers would be of more consistent spec.

I wouldn't doubt that one bit. In fact I'm pretty sure that after the whole comparison thread that was done earlier with the three different variations, that the Geissele is most definitely better spec'd. I don't have an FFT to compare but the fit is noticeably less sloppy with the Geissele hammer vs the Benelli stock one. Less side to side/lateral play. If I ever get an AR, I'll be getting a Geissele trigger for sure.

[KB Fab]

Interestingly, I googled "Geissele M4 Hammer" and came up with quite a bit. Lots of talk on different forums about it and a couple of links to the Geissele website but two that stood out to me. First, Brownells sells these and currently shows them as being "in stock". Also, Midway USA has added this part to it's website and shows it having an in stock date of 5/27. CarrierComp shows the part as being "temporarily" out of stock while Geissele shows it having a back order status.

Seems to me this shows "demand" of some sort and that perhaps, like other products, it will be just a matter of time before vendors will have their supply again. I would have included links but then the post would have disappeared into moderator no mans land.

[TKTM]

Thank you. I spoke with someone at Geissele who told me that there were no plans to discontinue the hammer so I feel with that, and the back order/listing status like you mentioned, a confidence that it isn't going anywhere.

.

Why now leave out the part now where the sales person at Geissele said "as far as I know" in response to your question?

Why is that you ran out and bought a hammer(s) based on the information I provided, but now you don't seem to want others to do the same?

Frankly the animosity makes no sense in and of itself, it makes me wonder if there is something more going on. Exactly how many M4 hammers did you buy? Maybe I should have tried to corner the market too instead of giving people here a heads up they were about to dry out?

[marc63]

Why now leave out the part now where the sales person at Geissele said "as far as I know" in response to your question?

Why is that you ran out and bought a hammer(s) based on the information I provided, but now you don't seem to want others to do the same?

Frankly the animosity makes no sense in and of itself, it makes me wonder if there is something more going on. Exactly how many M4 hammers did you buy? Maybe I should have tried to corner the market too instead of giving people here a heads up they were about to dry out?

Did you record KB's convo with Geissele? Because your inquiry conveys contrived portions no one here is privvy to.

KB may have believed your erroneous assertion and bought accordingly, yet I see no indication he (KB) is discouraging others from buying.

Your last paragraph is so utterly convoluted as to suggest... well words fail me. I will agree with one thing you said in it, something else is going on here, your marbles are all over the floor.