M4 Entry questions..

[FloridaMarine]

I tried to search the threads to answer as many questions I had, so please excuse me for any redundance.

Regarding the Benelli M4 Entry w/ fixed pistol grip stock, will these accept a c-stock, or do you have to replace the tube to make it adapt?

Also, where can you purchase a three point recoil tube???


Thanks, guys!

[KB Fab]

The way you asked the question doesn't make any sense. If it comes with a collapsible stock, model 11724, then it's moot. If you buy the model 11722, with the pistol grip stock, it will have the 3 position tube already installed on the receiver which will accept a collapsible stock.

[FloridaMarine]

Yes, I am unaware of model numbers regarding the entry model.

I know Impact is selling the fixed stock model for $1,600, which is affordable for me. I would like to incorporate a collapsible stock on it, but I was unaware if the fixed stock model would accept a collapsible stock without having to place the recoil tube.

I know there are M4 full size models that don't accept the c-stock unless you replace the recoil tube.

That is why I asked.

Obviously I wouldn't be asking you if the collapsible stock model would accept I collapsible stock.

[KB Fab]

Yes, I am unaware of model numbers regarding the entry model.

I know Impact is selling the fixed stock model for $1,600, which is affordable for me. I would like to incorporate a collapsible stock on it, but I was unaware if the fixed stock model would accept a collapsible stock without having to place the recoil tube.

I know there are M4 full size models that don't accept the c-stock unless you replace the recoil tube.

That is why I asked.

Obviously I wouldn't be asking you if the collapsible stock model would accept I collapsible stock.

Well, the only M4 that doesn't have the 3 position tube is the M1014 or one from several years ago. All the current, read new, M4's ship with the 3 position tube. This includes the entry as well as the standard models. So..........now you know. I guess it's a good thing you edited your original post eh? ;-)

[needncash]

IDK, where you have been misinformed but you will not be able to acquire the 14" SBS M4 for a mere $1600.00. A few people purchased the 14" barrel alone for $1000.00+ last year when they showed up on gunbroker. Do more research. With extreme luck you will be able to find a barrel for $1000.00, M4 for $1500.00, C-stock for $260.00, and the ATF tax stamp for $200.00. All of the above comes to $2960, and thats pending you don't like accessories.

[KB Fab]

IDK, where you have been misinformed but you will not be able to acquire the 14" SBS M4 for a mere $1600.00.

http://www.impactguns.com/store/11722.html


http://www.impactguns.com/store/11724.html

[needncash]

Pay close attention to the listing: Call for lead time, and Out of stock..accepting orders.

That is advertising.

[KB Fab]

Pay close attention to the listing: Call for lead time, and Out of stock..accepting orders.

That is advertising.

Not really. I happen to have one on order (deposit paid) with them and know roughly when it's supposed to arrive. I also have a copy of my invoice with the remaining balance listed so I can tell you that I will pay $1699.99 for it. They get them through Beretta Defense and while there IS a lead time, they do arrive based on how they are ordered. Call Clay at Impact and he will explain it all to you.

[needncash]

Thanks for setting me straight. So you've put a deposit on a gun that you don't have an exact date you can actually go purchase it and start the ATF papers. So you havent really purchased it for $1699.00.

Hmmmmm, I've got one you can put a deposit on but see if you actually get it or when I'm done borrowing your money I'll send you a zero interest refund.

[KB Fab]

Nice chatting with you.