Supernova tactical picatinny rail installation

[markscharff]

HELP...someone please tell me how to get those little plastic pegs out of the top of the shotgun.

Please walk me through the process of installing the picatinny rail. These little plstic pegs are killin me.

Do I need to remove something? Tried to pry out the pegs with a knife to no avail.

Dr. Benelli please help.....

[lococavi1993]

Sorry. I've been having problems with my desktop and haven't been on here daily. Otherwise I would have seen this and replied sooner.

I don't have my shotty or my manual handy but I will tell you what I remember. You have to take the trigger mechanism out. To do this you push the 2 pins out. They only go one way. Once the pins are out, lift up and remove the piece. Next you'll have to take the bolt out. Easy enough. Lift from the rear and it will slide out. When you get to this step the rubber plugs are exposed from the inside and are easily pushed out from the underneath of the receiver. You'll have to refer to the manual for re placement of the bolt. Make sure it is installed correctly.

[mtod]

I would like to know where you purchased the bracket for the light.

Is that a Mesa bracket?

[M2USER]

HELP...someone please tell me how to get those little plastic pegs out of the top of the shotgun.

Please walk me through the process of installing the picatinny rail. These little plstic pegs are killin me.

Do I need to remove something? Tried to pry out the pegs with a knife to no avail.

Dr. Benelli please help.....

Will I have to go thru the same process with my M2? I've a rail coming from Mesa and the Aimpoint T-1 w/the Larue Low mount. Kinda surprises me, tho no big deal I guess. I'll dig out my manual.
Thanks guys
M2USER

[M2 Tactical]

So how does one remove the plugs to install a rail on an M2 Tactical?

Can the plugs be notched and removed with a screwdriver?

Or does one have to go in through the receiver?

Thanks for any tips and tricks!

[M2USER]

Break down the weaspon, extract the bolt and push the plugs out from the inside of the receiver...a real pain in the ass. Why the just don't use threaded plugs is beyond me.