+ Reply to Thread
Results 1 to 5 of 5

Thread: Mercury Recoil Reducers

  1. #1
    Join Date
    Jun 2007
    Location
    Mississippi
    Posts
    6

    Default Mercury Recoil Reducers

    I shoot alot of 3.5 inch shells at geese. Does a mercury reducer work that well? and exactly how does it work? Thanks
    RajunCajun

  2. #2
    Join Date
    Sep 2004
    Location
    USA
    Posts
    7,351

    Default Elfin' Magic!

    It works for me.
    I use the C&H model that replaces the barrel nut on my SBEII.

    The recoil reducer works in two ways.

    1. It adds weight to the gun. Heavier gun means more energy is used on setting the gun into motion and keeping it moving. That means less energy is transfered to your shoulder.

    2. The mercury is in a sealed tube, but the tube isn't full, so the liquid metal is allowed movement inside the tube. I don't know all the mathemetical formulas and laws of physics, but the movement of the liquid further dampens the sharpness of the recoil so that it's more of push than a whack.
    As you idea, Your picture don't very warm and wet. Have much die of bird. I think this isn't only a game.

  3. #3
    Join Date
    Feb 2007
    Posts
    27

    Default

    Quote Originally Posted by RajunCajun View Post
    I shoot alot of 3.5 inch shells at geese. Does a mercury reducer work that well? and exactly how does it work? Thanks

    The scientific babble would be about Newton's law every action has equal and opposite reaction. If you make the weapon heavier, the rearward velocity must be reduced to keep the formula in balance. M1V1 = M2V2 . Mass1 ( The projectile) times Velocity1 (Initial projectile velocity) equals Mass2 (Weight of the weapon,the caseing, etc) times Velocity2 (rearweard velocity of the weapon, caseing etc). Less rearward velocity equates to less felt recoil.

    The fluid fills less that the availave volume. The fluid's initial accelleration and density absorbs some energy further reducing 'felt recoil.

    For any given cartridge, a heavier weapon has less felt recoil that a lighter weapon. Which is why the M1 garand is such a fine shooter - its heavy! Much heaver than my H&R HandiRifle in 30-06.

    I have one for my Tactical Nova I use it during practice exercises - It does add weight to the weapon making the Nova heavy. I remove it after the exercise. When many rounds are going ot be expended during a session, the unit helps my aged shoulder with rotator cuff problems...

    Hopes this helps -

    Rick
    Last edited by R Cubed; 07-13-2007 at 02:49 PM.

  4. #4
    Join Date
    Sep 2003
    Location
    S.E. USA
    Posts
    61

    Default

    I installed the Benelli recoil reducer in my Nova Tactical and didn't feel much difference in perceived recoil. The unit adds about one-pound to the weight of the gun, so there is some reduction due purely to the added weight, but not enough to justify the price. I could have added one-pound of anything and it would have had the same effect! However, some users of the recoil reducer feel that it is more effective with heavier loads. I was using law enforcement reduced recoil buckshot and slug loads.

    If you are expecting a major reduction in recoil by adding a mercury recoil reducer, I think you will be disappointed.

  5. #5
    Join Date
    Feb 2007
    Posts
    27

    Default

    Quote Originally Posted by HerbG View Post

    If you are expecting a major reduction in recoil by adding a mercury recoil reducer, I think you will be disappointed.

    Yep - 10% at most...

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •