Nova +2 ext.?

[ArmChairCommando]

I have a Benneli brand 2 shot extention that I tried to install on a SuperNova Tactical and the spring seems to be too long! It will not allow the 5th or 6 th round to be loaded like the spring is to compressed or is binding up any ideas anyone?

[edon]

I initially had this problem as well when I installed my factory extension. What was happening on mine was that when I would tighten down the extension it was pinching a spring coil between the mag tube and extension. Just load a few shells, then loosen off the extension slightly at both threads and you should hear the spring pop free. Tighten everthing up again and now should be able to load your +2.

[sonyman74]

Well, I don't have my plug in and can put 7 in the mag. I have had no problems with mine.

[ArmChairCommando]

I initially had this problem as well when I installed my factory extension. What was happening on mine was that when I would tighten down the extension it was pinching a spring coil between the mag tube and extension. Just load a few shells, then loosen off the extension slightly at both threads and you should hear the spring pop free. Tighten everthing up again and now should be able to load your +2.

Thanks that must be it!!!!

[ArmChairCommando]

Edon that was it lol, I should have known when it would not take more than 4 rounds. Thanks for pointing out the " right in front of your face!!" Now I am the proud owner of a all Benelli 6+1 Tactical.