sbeII factory full choke

[NoTox]

Just wondering if anyone has patterned teh sbeII with the factory full choke for turkey type applications. I don't turkey hunt but 1 or 2 time a season, therefore can't justify spending $80-100 on a choke if it is not a great improvement. Surely the factory choke can do the job. I hope to get out and pattern it this week, but I was just seeing if anyone had experience with this. Thanks.

[tucker301]

If I were going to use the factory choke, I'd at least invest in the Federal Flight Control loads.
I haven't tried the full, but I got results with the modified factory tube in my SBEII.

[parknutz]

I have patterned the SBE II full choke with several different loads and I’m not real excited with the results!! All shots @35yds - First tried Remington – Premier H.V. 3” #5, next Kent ‘ultimate’ 3.5” #5, then Winchester Supreme 3.5” #5 – I was not pleased with any of the results- don't get me wrong it I'll kill but – My buddies were shooting super870’s with hevi-shot chokes with the same loads and just smashing the paper. I am wondering has anyone found that deadly combo of aftermarket choke and load for the SBEII.

oh, what are fed flight control loads?

More Info would be great.
dg

[tucker301]

I suppose if you were REALLY interested, you might wander over to Federal's website and have a look.

/assuming you have internet

[Fuzzhead44]

If you are looking for a shot that will do the job, visit the Nitro Company web site.
http://www.nitrocompany.com/
We pattern The Nova 26 inch this pass weekend using #5 shot Nito 2 5/8 which has 5-6 and 71/2 mixed. It is unbieveable. Oh yes
we used the Comp N Choke XXX Full
Check it out for your self. Happy hunting

[tcbow99]

I have the same dilemma with the sbe2. I just bought one and was looking for a turkey choke. I've read alot about it and checked on several forums. A bunch of guys are raving about the SRM Terror .655. They claim to be able to put "virtually" every pellet in a 30" circle at 40 yards. I know that Briley is making the extra full tube for the sbe2's. I'm not sure what to do.

[HavocTec]

I will be patterning my Briley Xtra-full and factory chokes this week on my SBE2. Will try and post once I get it done.

[mudhen]

Kicks .655 patterned fine, but actually a bit less dense than the Kicks .660. Both acceptable and can put 50% of the pellets in the 10" circle area.

I'll test a Terror .655 next week and report the results.

mudhen - CA

[HavocTec]

Sorry took so long to post a reply. I finally tested my factory tubes, Briley X-Full and Undertaker HS with multiple loads (Rem HVY 3" & 3 & 1/2" 5's & 6's, Win Supreme HV 5's, Rem Nitro Turkey, Federal Flight Control's...). It didnt matter what load, choke or distance to about 30 yards. I got the most consistent patterns with the X-Full -approx. 10 in the vitals & 180+ in a 10 inch circle most loads. The best performing loads were the cheap stuff - Rem Nitro Turkey 3" 5's & Win Sup HV 3" 5's (. I had some gaps in the pattern with all the "newer"(HVY & FC) style loads, but they all would still kill out to 35 yds and hit the target with considerably more punch. I never got anything I liked at 40 - 3 or less in the vitals and less than a 3rd of the pellets in the 10 with gaps no matter what I tried. I tried backing out to the IC with HVY Shot like a previous post in these forums suggested, but it was really sparse & lots of gaps all loads.

I am going to go a little tighter this week and test a Carlson's .655 this week & if no results I'll be shooting less than 30 yards for sure this weekend & purchasing a Rhino or Kicks (like most of the posts on NWTF forum suggest) for later this season or next.

I geuss I will get shooting less than 30 yards most of the time anyways, so I'm good to go this year. It sure would be nice if I could have confidence out to 40 in case I get excited and mis-judge that distance a bit! [img]smile.gif[/img]

Hope this helps!

[ 04-11-2005, 07:49 PM: Message edited by: HavocTec ]