m2000 out of the box review

[lalle]

Greetings!

as some of you know from reading older post by me, the application for a license takes time in sweden. well finaly it droped in the mail. drove as fast as i could and picked her up [img]smile.gif[/img]

besides some rust on two of the shokes and some rust on the spring that shotgun was in good order, disembeld it (couldent get the trigger mecanisem out *grumbels* and didnt whant to use force) and oiled it in and reasemberld it.

hopefully will get a chanse to test shot her tomrrow

a lil question, did yall yet two kinds of springs ? i got two, one that should work with as low loads as 24+g and a other that should used for 42+g loads.

ps. for new owners, dont try spray gun oil (i did). after a few seconds the black surface turned gray and i thought i had ruined the finish for ever, well applyed regular gun oil and it returned to its former self.

[BADSHOT]

Two spring's? Must be something new.

[lalle]

wont be able to test her today, to much snow and cold
(-20 degree Celsius = -4 degree Fahrenheit)

[birddog]

Originally posted by lalle:
wont be able to test her today, to much snow and cold
(-20 degree Celsius = -4 degree Fahrenheit)

good plan lalle!

hope all goes well!

[lalle]

3 degree Celsius = 37.4 degree Fahrenheit
Whent about 7km outside the town to a rather strange spot where one can find old burnt down cars (some ppl do that to get enscuranse). the shotgun preformed wounderfull, the rocoil was very light and it reloaded perfectly with diferent ammo brands. did the loading part wrong one time so the shotgun preformed a click. oh well, then i tryed a few slugs on one of the cars, the slugwhent right throu the car i also tested on a big chunk of wood that i had brought along, it split into two parts.

in a week or two im going to a real shoting range and im sure it will preform great.

best regards
lalle

[BADSHOT]

That's good everything is working. Wellcome to the club.