Search:

I think you will have a harder time finding just a slug barrel(new or used). I always bought gun w/slug barrel for this reason.

There is a range of bore diamaters that meets the standard of a 12 gauge, SBE leans towards the tighter side. They feel their market is for what they make. Berretta runs middle of the road and...

E R Shaw is still in business, do a internet search. That barrel should be a SBE(will fit a SBE II) barrel. They made slug barrels for Benelli for many years. It has heavier walls than newer...

I bought here:http://www.shotgunbroker.com/Barrels.html

Color New Jersey the same.

A SBE barrel will fit a SBE II. Newer barrels have a longer mounting tab on the magazine ring but you have a forearm to match slug barrel so there can not be any problems.

The only part I question is"And wads separate from the shot within a foot or two of the muzzle, and are then a non-factor". If they push the shot after the muzzle at all they must have some affect.

The ring and upper reciever are repairable. To get a custom left hand slug barrel made I had to supply a factory shot barrel to obtain these parts. They are not a seperate items you can order. ...

I have found magazines that have ammo left loaded tend to weaken the spring and cause mis-feeds. If it has been loaded that long the magazine might be junk.

No new forearm. The new barrels are same ouitside dia., slug or shot.

I will answer your questions w/statement of what I know.
Newer barrels have a longer mating surface of the magazine ring. This can cause forearm fit problems w/older gun and newer barrel combo,...

It comes tapped on the reciever, no cantilever mount. It takes a standard scope base. That is the nice part, a good scope mount that goes with the barrel assembly. The fast twist rate makes it a...

I slide the bolt forward slowly until it rest on lugs. I then wiggle the bolt handle(up and down) and the action will lock. You can see the lug rotate and you feel the action go forward. The...

Why would you want a cantilever when the barrels are tapped on the reciever? Shaw made barrels for Benelli years ago, now they make their own slug barrels. The new barrels have iron sights and...

Shaw barrels have thicker walls and do not have open sights.

I have the extended, I only shoot 3 1/2" OO buckshot w/gun.

I have one and love it. The problem is I do not know a answer to your question. They will exchange/refund so maybe you should buy both and return unwanted tube.

Before I bought a rifled barrel slug gun(20 yrs ago) I tried everything w/barrels and different slugs. My results were no restriction worked best(cyl.). I also had best luck w/Active slug which, by...

I have tried pattern master on 3 Brownings, 4 SBE II's and 2 Extrema's and found about half shot better than any other chokes, the other half were bad. They have a good return policy, try them and...

I have the same handgun and have a Fastfire mounted. I have had no problems.

A 3 1/2" 12 ga. has a higher pressure limit than 3". It will "carry longer" IF round is loaded to the higher pressure.

Someone, in another post, stated they plan on acc.(such as slug barrel) in future. He did not know what they would come up with(left hand, slug barrel, etc).

Brownells or a local gunsmith. Get plug screws, they tighten by having a slight head. A set screw will not tighten and might work down and hit bolt. The only place I have seen the plastic plug is...

In Delaware it is two bucks and four does w/lic. You can kill all the does you want for $10 for each tag. All deer get tagged, the game wardens are great. I have had 10 deer in a pickup, stopped...

I have owned both, they are both good guns. I only have SBE's now and the reasons are, easier to clean, less moving parts, feels better and they make a left hand gun(least important). I must also...