Search:

Another, although a more expensive way to do this is to have someone like Ballistic Specialties or Magnaport lengthen the forcing cone and/or back bore the barrel. Even though this slightly decreases...

If you're a decent hand with a file there is no reason you can't do this yourself. Actually you have it mostly right as far as the forend having something to do with the tightness. The forend lug...

Remember you have a sporting gun that is designed to handle 3 1/2" shells. Minimum load should be a 3 dram 1 1/8oz Heavy Target. Standard trap or skeet loads may not work reliably in a gun designed...

All of them say patent pending and barrel numbers and receiver numbers never match.

Yes, you can shoot modern ammo in the 1885. I do all the time.

Yes there is a youth stock for the 20ga condor but it must be fit. The way these things are made you just cant slide one on and that's why they aren't listed. More than likely if you send the gun in...

Do not use snap caps to get an idea on how any shotgun cycles. They are not the same size or weight as a live shell (not built to the same dimensions), they aren't even dummy rounds. Snap caps only...

Yes it will. Only the underside of the bolt and the trigger assembly have changed since then.

Yes it is a stamped out part and they rarely break. Seen thousands of Benellis through my hands and the factory one for the SBE and M4 are different lengths, just different finish. That is why you'll...

Sorry, I goofed! Fingers outran my brain...The long pad used to be on the short stock so the tall people could not get the longer LOP. Stocks are longer now so the advertised LOP's can be achieved....

Try to make this short...someone in Italy was not paying attention to detail. Initially, all the SBEII, M2's had the long pad on them. It just happened to be that the long pad was on the long stock....

The end of the gas piston that has the loose or turnable ring should be pointed to the front for 2 3/4" loads. BTW min load is 2 1/2 dram 7/8oz. Solid ring to the front for 3". I know the Italians...

The tube to receiver fitting does have loctite on it, about a 271 type, but if it is a newer gun you should have 2 flats on the far end of the tube. If this is correct all you have to do is use the...

Depends on when it was made. Very early models from chantilly or sterling only used 2 (one wavy, one flat). After that point they all used 4 (flat, wavy, flat, retainer). Now if you have a sure-fire...

Are you ready for this??? There aint no screws that hold the Ultralight recoil pad on. It's a clip on pad. Place a thin screwdriver between the plastic on the pad and the stock and pry it off. Let me...

This is something you can do yourself. Simply clean all grease and oil from the threads (must be void of any oils), make sure they screw together easily and flush. Take them back apart and apply...

You can trim about 8 inches from the magazine spring and it will still feed fine. Yes, the spring is too strong and your diagnosis is correct. Dont put snap caps in the magazine, they may get stuck....

That is the ejector assembly. It has nothing to do with wheather your gun will fire or not. But it is available as an assembly (33298) and should be changed before it breaks off. You probably need a...

Call the Benelli customer service number. Yes, there are stocks available

2000 defenitely not, 3000...I'll check and get back to you.

Sending you a private message.

I would suggest looking for a barrel for an M1 Practical 26". If you cannot find one I may be able to help you. Check and look online to see if this will suit your needs.

Call or email the customer service dept and they can tell you when it was originally sold which is usually within four months just after it was made.

Yup, same thing. Improved cyl (4) is usable also but nothing tighter. Try it with both. BTW watch for barrel leading. The chrome lined barrels can lead up quickly and will affect your accuracy. Get...

It's just a roll pin and it will be just fine. Probably where it was pounded in and took part of a layer off. It will still hold, looks like it's all the way through anyway. If you find it unsightly...