View Full Version : My Cattleman Cylinder doesnt lock when Hammer down
10-29-2010, 06:10 PM
I took the Sear & Bolt Spring out to find it was broke... my gun is an 2005 model in 45LC and should be still under warranty but I don't want to send it in just for that when I can replace myself... how hard is it to get parts from Uberti? Any help would be great...
11-18-2010, 04:34 PM
Are you talking about the trigger/bolt spring or the bolt itself?
The trigger/bolt spring is simple to replace and parts are easily available from VTI Gunparts. If it's the bolt itself, that's a different story. The parts are also readily available, but unless you know what you're doing, I'd recommend takling it to a good gunsmith for replacement. The bolt legs are critical to the timing of the revolver and it's easy to muck it up if you aren't experienced in replacing them.
12-09-2010, 03:38 AM
That's some sane advice that he has got about changing the broken part of his 2005 model in 45 LC as some of these parts needs profession care when they are being replaced and it is always better that we let them do the replacement instead of making a mess of it!!
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.